Description

• Limits of Use:
  -Liquid Temperature: -10°c to +40°c
  -Immersion depth up to 3m
  -Passage of suspended solids up to Ø10mm
  -Suction level: 14mm above the ground level
  -Power: 50Hz, Single phase 220v, up and down 10%
  -Capacitor and thermal overload protector built into the winding.
  Features:

  -With the two impellers design to assure the higher head under the same power.

  -Thickness design for the pump casing to assure the pump to bear the pressure of the 2 times more than itself head.

  -Using the high-grade M/S to assure no leakage under high pressure.

  -The adoption design of that inlet is bigger than an outlet to assure reach the highest head.

  -All the pumps use a valve core instead of a bolt to release the air easily.

  Application:

  -Suitable for draining clean water without the abrasive particles.

  -Suitable for emergency draining of small flooded areas, rooms, garages etc. for the disposal of non-sewage waste water.

  -Suitable for small fountain.

  Components & Materials:
  -Pump discharge body: Glass-fibre filled with technopolymer
  -Impeller: Technopolymer
  -Mechanical Seal: Graphite-Ceramic with oil barrier chamber and inner lip seal to protect the M/S in the event of dry running.
  -Bearing: Z4 Class
  -Shaft: Stainless Steel
  -Insulation: Class F
  -Protection: IP68
  -Motor: Submersible asynchronous single-phase for continuous duty.
  Type code ‘F’ means pump equipped with float switch.